Samsung Digimax350 SE User Manual

Contents

Samsung Digimax350 SE User Manual Manual pdf 19 page image

PREPARATIONConnecting to PowerREADYThere are two ways in which to provide the camera with power. You can use batteries(AAAlkaline or CR-V3), or alternatively, you can use an AC Adapter (DC 6V / 2.0A).Using the batteries1 Open the battery chamber cover by pushing in thedirection of the arrow.2 Insert the batteries taking note of the polarity (+ / -).3 To close the battery chamber cover, push it until it clicks.ReferenceThis camera will automatically switch off when not in use for a period of time.We recommend high–capacity ALKALINE batteries (2000mAh) as manganese batteriescannot deliver sufficient power.NoteImportant information about battery usagePlease remove the batteries if the camera will not be used for long periods.Batteries can lose power over time and are prone to leaking if kept inside the camera.Low temperatures (below O°C) can affect the performance of the batteries and you mayexperience reduced battery life.Batteries will normally recover at normal temperatures.Do not use old and new batteries at the same time.During extended use of the camera, the camera body may become warm. This is perfectlynormal. If you are planning to use this camera for long periods of time, it is advisable touse an AC adapter.