Samsung DynaFlat TX R2765 Owner's Instructions Manual

Contents

S P E C I A L F E AT U R E S63Customizing Your Remote ControlYour TV comes equipped with a universal remote control. In addition to controlling the TV,the universal remote control can also operate a Set-Top Box, VCR, Cable box and DVD (evenif your VCR, Cable box and DVD are made by manufacturers other than Samsung).• The remote control might not be compatible with all VCRs, DVD players and Cable boxes.1Turn off your VCR (Cable box or DVD player).2Press the MODE button and make sure that the VCR (CABLE or DVD) LED isilluminated.ˇ The remote control has fivemodes: TV, STB, VCR, CABLEand DVD.3On your Samsung remote control, press the SET button.4Enter 3 digits of the VCR (Cable box or DVD player) code listed on next pagefor your brand of VCR (Cable box or DVD player).ˇ Make sure you enter 3 digitsof the code, even if the first digitis a “0”. (If more than one codelisted, try the first one.)5Press the POWER button on the remote control. Your VCR (Cable box orDVD player) should turn on. If your VCR (Cable box or DVD player) turns on,your remote control is now set correctly.ˇ If your VCR (Cable box orDVD player) does not turn on,repeat steps 2, 3, and 4, but tryone of the other codes listed forthe brand of your particular VCR(Cable box or DVD player).6Once your remote control is set up, press the MODE button any time youwant to use the remote to operate your VCR (Cable box or DVD player).• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,PLAY/PAUSE and FF) will still operate your VCR (or DVD player).• When your remote control is in the VCR (CABLE or DVD) mode, the volume buttons still con-trol your TV’s volume.Setting Up Your Remote Control to Operate Your VCR (Cable boxor DVD player)