Samsung DynaFlat TXN2668WHF Owner's Instructions Manual

Also see for Tantus TXN 3098WHF: Owner's instructions

Contents

22Connecting to DVI (Digital Visual Interface)(TXN3298HF/TXN3098WHF/ TXN2798HF)By inputting a high-bandwidth Digital Content Protection high-definition picture sourceto the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on thescreen in their digital form. (This DIGITAL INPUT jack is for use in the future whenHigh-bandwidth Digital Content Protection DTV decoder, DVD players and D-VHS areput on the market.)2Connect a set of audiocables between theAUDIO INPUT jacks on theTV and the AUDIO OUTjacks on the Set Top Box.3Connect a DVI cablebetween the DIGITALINPUT jack on the TV andthe DVI OUT jack on theSet Top Box.1Connect a coaxial cablebetween the ANTENNAOUT terminal on the SetTop Box and the antennaterminal on the TV.I N S TA L L AT I O NNote• The DIGITAL INPUT jack can only be use with 1080i and 480p picture signals.Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080I OR 480P.For detailed information, refer to the Set Top Box instruction manual.• The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with aDTV decoder.