036Self-timer ( ) / Right buttonSelecting the self-timer1. Select a Recording mode with theexception of Voice recording mode.(p.20)2. Press the Self-timer ( ) button untilthe desired mode indicator displays onthe LCD monitor.3. When you press the Shutter button, thepicture will be taken after the speciedtime has elapsed.Icon Self-timer Mode Description10SEC self-timer Pressing the Shutter button will allow an intervalof 10 seconds before the image is taken.2SEC self-timer Pressing the Shutter button will allow an intervalof 2 seconds before the image is taken.Double self-timerA picture will be taken after about 10 secondsand 2 seconds later a second picture will betaken.Motion TimerThe camera detects the subject’s movement6 seconds after pressing the Shutter button,and the picture is taken when the movement isstopped.RemoteYou can take a picture by remote control insteadof using the shutter button of the camera.Remote control mode is maintained afterrecording. Press the power button to releasethe setting.When the menu is displayed on the LCD monitor, pressing theSelf-timer ( ) / Right button makes the cursor shift to the right tab.When the menu is not displayed on the LCD monitor, the Self-timer( ) / Right button operates as the Self-timer ( ) button. Thisfunction is used when the photographer would also like to be in theimage.If you operate the Self-timer( ) button during the self-timeroperation, the self-timer function is cancelled.Use a tripod to prevent the camera from shaking.In Movie Clip mode, only the 10SEC self-timer will work.When you select 2SEC self-timer with ash, the delay(2 seconds) can be extended according to the ash chargingstatus.When taking a picture using the self-timer, the self-timer lampworks as follows :10SEC self-timer– For the rst 7 seconds, the lamp blinksat 1 second intervals.– For the nal 3 seconds, the lamp blinksquickly at 0.25-second intervals.2SEC self-timer For the nal 2 seconds, the lamp blinksquickly at 0.25-second intervals.11