Camera Operation 40Camera and Camcorder SettingsThis section describes the different settings that you canconfigure on your camera. Not all of the following options areavailable in both still camera and video camera modes. Theavailable options vary by mode.1. From the viewfinder, tap .2. The follow settings are located under the Camera,Camcorder, Share, and General tabs. The settings thatare displayed will depend on what camera mode youare in.Camera:• Photo Size: Select a resolution for photos. Use higherresolution for higher quality. Higher resolution photos take upmore memory.• Flash: Activate or deactivate the flash.• Timer: Use this for delayed-time shots. You can set the timer toOff, 2 sec, 5 sec, or 10 sec.• Detection display: This option places the focus on any facesthat are detected when you take a photo.Camcorder:• WB (light source): Select an appropriate white balance, soimages have a true-to-life colour range. The settings aredesigned for specific lighting situations. These settings aresimilar to the heat range for white-balance exposure inprofessional cameras.• Timer: Use this for delayed-time shots. You can set the timer toOff, 2 sec, 5 sec, or 10 sec.• Movie size: Select a resolution for videos. Use higher resolutionfor higher quality. Higher resolution videos take up morememory.• Metering: Select a metering method. This determines howlight values are calculated. Center Weighted measuresbackground light in the centre of the scene. Spot focuses on anindividual location. Multi averages the entire scene.Activate or deactivate the sharing options.Activate or deactivate the voice control to take photos.Configure Camera settings.Hide Quick settings.
