045Shooting ( )ACBThis function is to adjust the contrast automatically when takingphotos in an environment with big exposure difference i.e. backlightor contrast. This function adjusts the brightness automatically andallows the subject to be photographed clearly.- [ACB] Sub menus: [Off], [On]Ä The ACB function is available in [Program], [Portrait] or[Photo Help Guide] recording mode. ACB function alwaysoperates in the [Portrait] recording mode.Drive modeYou can select continuous shot, and AEB (Auto Exposure Bracketing).[Single] ( ) : Take one picture only.[Continuous] ( ) : Images will be takencontinuously untilthe shutter button isreleased.[Motion Capture] ( ): This takes about 6shots per second, when the shutter is pressedand held down. After completing the continuousshooting, images are saved and the imagesplay back on the Rear LCD.The maximum number of shots is 30 and theimage size is fixed as VGA.[AEB] ( ) : Take three consecutive photos with varyingexposure values. Use this mode if it is hard todecide exposure of the object.å High resolution and picture quality increases file saving time,which increases stand-by time.å If the [Continuous], [Motion Capture], [AEB] sub menu isselected, the flash will be off automatically.å If less than 3 pictures are available on the memory, the AEBshooting is not available.å If less than 30 pictures are available on the memory, the motioncapture is not available.å It is best to use a tripod for the AEB shooting as the time to saveeach image file is longer and blurring caused by camera shakemay occur.ACBAuto Contrast Balance automatically compensates forbrightness differences.Back MoveSet the shooting type.DriveBack Move