054Imprinting the recording dateÄ The Date & Time are imprinted at the bottom right side of the stillimage.Ä The imprint function is applied only to still images.Ä Depending on the manufacturer and print mode, the date printedon an image may not be printed correctly.There is an option to include Date&Time on still images.- Sub menus[Off]* : The Date&Time will notbe imprinted on the imagefile.[Date] : Only the Date will beimprinted on the imagefile.[Date & Time] : The Date&Time will beimprinted on the image file.Settings ( )This function allows the user to select the file naming format.[Reset] : After using the reset function,the next file name will be setfrom 0001 even after formatting,deleting all or inserting a newmemory card.[Series]* : New files are named using num-bers that follow the previous sequence, even when a newmemory card is used, or after formatting, or after deletingall pictures.- The first stored folder name is 100PHOTO, and the first file nameis SAM_0001.- File names are assigned sequentially from SAM_0001 SAM_0002 ~ SAM_9999.- The folder number is assigned sequentially from 100 to 999 asfollows: 100PHOTO 101PHOTO ~ 999PHOTO.- Maximum numbers of files in a folder are 9999.- The files used with the memory card conform to the DCF (Designrule for Camera File systems) format. If you change the image filename, the image may not play back.File nameBack SetResetLanguage :EnglishTime Zone :LondonDate/Time Set :10/01/01Date Type :SeriesFormatFile No. :OffResetSeriesBack SetAuto Power OffAF LampVideo Out :NTSCUSB :AutoBattery Type :AlkalineImprint :OffOffDateDate & Time