52The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device(monitor or TV, etc.) to which the camera is connected. PALmode can support only BDGHI. Connecting to an external monitorWhen the camera is connected to anexternal monitor, the image and menuson the LCD monitor will be visible on theexternal monitor and the LCD monitor ofthe camera.Selecting Video out typeSettings ( ” )- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.- PAL : Australia, Austria, Belgium, China, Denmark, Finland,Germany, U.K., Holland, Italy, Kuwait, Malaysia, NewZealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway.- When using a TV as an external monitor, you will need to selectthe external or AV channel of the TV.- There will be a digital noise on the external monitor, but it is not amalfunction.- If the image is not in the centre of the screen, use the TV controlsto centre it.- When the camera is connected to an external monitor, some partsof the image may not be displayed.- When the camera is connected to an external monitor, the menuwill be visible on the external monitor and the menu functions arethe same as those indicated on the LCD monitor.Back SetAF Lamp :OnUSB :AutoVideo Out :NTSCNTSCPALYellow - VideoWhite - Sound
