24Starting the recording modeHow to use the Movie clip mode ( )A movie clip can be recorded for as long as the available recordingtime of the memory capacity allows.1. Select the Movie clip mode by pressingthe MENU button. (The Movie clipmode icon and available recording timewill display on the LCD monitor.)2. Point the camera towards the subjectand compose the image by using theLCD monitor.3. Press the shutter button once and movie clips are recorded foras long as the available recording time allows. Movie clips willstill be recorded if the shutter button is released. If you wish tostop recording, press the shutter button again.Ä Image size and type are listed below.- Image size : 640x480, 320x240 (Selectable)- Movie clip file type : AVI (MJPEG)- Frame Rate : 30 FPS, 15 FPS (Selectable)You can record the movie clip without sound.Steps from 1 -3 are the same as those forMOVIE mode.4. Press the Menu button.5. Press the Up / Down button to select the[Functions] menu and press the Rightbutton.Recording the movie clip without sound Using Successive RecordingSteps from 1-2 are the same as those forMOVIE CLIP mode.3. Press the shutter button and movieclips are recorded for as long as theavailable recording time. Movie clipswill still be recorded if the shutterbutton is released.4. Press the OK button to pause recording.5. Press the OK button again to resume the recording.6. If you wish to stop recording, press the shutter button again.This camera allows you to temporarily stop during unwantedscenes, while recording a movie clip. Using this function, you canrecord your favourite scenes into a movie clip without having tocreate multiple movie clips.Pausing while recording a movie clip (Successive Recording)6. Select the [Voice] menu by pressing the Up / Down button andpress the OK button.7. Select the [Off] menu by pressing the Left / Right button.8. Press the OK button. You can record a movie without sound.Ä See p.45 for further details.Stop Record