096FAQ When the DirectX 9.0c or later is not installed Install the DirectX 9.0c or later1) Insert the CD provided with the camera2) Run the windows explorer and select the [CD-ROM drive:\DirectX] folder and click the DXSETUP.exe file.The DirectX will be installed.Visit the Microsoft website for downloading the DirectX. If a PC connected with the camera stops responding whileWindows is starting. In this case, disconnect the PC and the camera and Windowswill start. If the problem happens continuously, set the LegacyUSB Support to disable and re-start the PC. The Legacy USBSupport is in the BIOS setup menu. (The BIOS setup menudiffers from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu byyourself, contact to the PC manufacturer or BIOS manufacturer.Correct disposal of batteries in this productCorrect disposal of batteries in this product(Applicable in the European Union and other Europeancountries with separate battery return systems.)This marking on the battery, manual or packaging indicates that thebatteries in this product should not be disposed of with other house-hold waste at the end of their working life. Where marked, the chemi-cal symbols Hg, Cd or Pb indicate that the battery contains mercury,cadmium or lead above the reference levels in EC Directive 2006/66.If batteries are not properly disposed of, these substances can causeharm to human health or the environment.To protect natural resources and to promote material reuse, pleaseseparate batteries from other types of waste and recycle them throughyour local, free battery return system.