Transferring files to the computerPlayback/Editing 86Transferring files to your Mac OS computerWhen you connect the camera to your Mac OS computer, the computer willautomatically recognize the device. You can transfer files directly from the camera tothe computer without installing any programs.Mac OS 10.5 or later is supported.1 Turn off the camera.2 Connect your camera to your Mac OS computer with the USB cable.You must plug the small end of the USB cable into your camera. If the cableis reversed, it may damage your files. The manufacturer is not responsible forany loss of data.Disconnecting the camera (for Windows XP)With Windows Vista, Windows 7 and Windows 8, the methods for disconnecting thecamera are similar.1 If the status lamp on your camera is blinking, wait until it stops.2 Click on the tool bar at the bottom right of your computer screen.3 Click the pop-up message.4 Click the message box that indicates the camera can be removedsafely.5 Remove the USB cable.
