Samsung FlatFOTO 2.0 User Manual

Samsung FlatFOTO 2.0 User Manual Manual pdf 11 page image

11Formatting Internal Flash Memory or SD CardTo format internal flash memory or SD cardWarning: Formatting an SD card or flash memory will delete all information.• If formatting an SD card, insert the card into the camera. Remove the SD card if youare formatting the internal flash memory.• Turn the camera on and switch the Picture-Taking Mode/ Playback Mode to playback.• Press the Menu button and use the up/down arrow buttons to Select Format.• Press the Select button to confirm your selection.• Use the up/down arrow buttons to select Yes/No.• Press the select button to confirm your selection.• To resume taking pictures, switch the mode selection switch to Picture-Taking mode.FCC DECLARATION OF CONFORMITYThis device complies with Part 15 of the FCC rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.Product: FlatFOTO 2.0 Digital CameraModel: 16-3831Responsible Party: RadioShack100 ThrockmortonFort Worth, TX 76102Phone: 817-415-3200The FCC Wants You to KnowThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult your local RadioShack store or an experienced radio/TV technician for help.