Settings Connections Settings 118Bluetooth Settings Operationsn Change your phone name: From Bluetooth settings, tap More options > Rename device,enter a new name, and tap Done.l This changes the name of your phone as seen by other devices.n Pairing Bluetooth devices: Make sure the other devices are set to be discovered. FromBluetooth settings, tap the device name in “Available devices” and follow the prompts.l Depending on the device, you may be required to enter or accept a passkey.l If the target device does not appear, tap Scan to search again.l This setting is available when Bluetooth is enabled.n Change the name of a paired device: From Bluetooth settings, tap Settings next to apaired device name, tap Rename, enter a new name, and tap OK.l Emoji cannot be used in a device name.l This setting is available when Bluetooth is enabled.n Canceling pairing: From Bluetooth settings, tap Settings next to a paired device name,and then tap Unpair.l This setting is available when Bluetooth is enabled.n Search for other devices: From Bluetooth settings, tap Scan.l This setting is available when Bluetooth is enabled.n Check files received using Bluetooth transfer: From Bluetooth settings, tap More options> Received files, and then follow the prompts.Phone VisibilityAllow other devices to find your phone and transfer files. Your phone will appear in the list ofavailable devices when files are transferred using Transfer files to devices.1. From home, tap Apps > Settings > Connections .2. Tap Phone visibility.3. Tap On/Off to enable the feature.
