Changing Your Settings 258Android BeamThis feature (when activated via NFC) allows you to directlybeam application content to another NFC-capable devicewhen they are in direct contact. These files are typicallysmall such as Calendar and Contact entries.1. Press ➔ and then tap Settings ➔ More...2. Verify the NFC feature is active.3. Tap Android Beam and make sure the feature is turnedon.4. If not already active, in a single motion touch and slidethe Android Beam slider to the right to turn it on.5. Complete the transfer process between the twoNFC-enabled devices by placing them back to back.Wi-Fi Direct Setup and SettingsYou can configure your device to connect directly with otherWi-Fi capable devices. This is an easy way to transfer databetween devices. These devices must be enabled for Wi-Fidirect communication. This connection is direct and not via aHotSpot or WAP.Note: Activating this feature will disconnect your current Wi-Finetwork connection.To give your Wi-Fi Direct connection a unique name:It can be difficult to pair to external devices if all you have isa generic name (ex: Android 12345). It is recommended youprovide your connection with a unique name.1. Press ➔ and then tap Settings ➔ More... ➔Wi-Fi Direct.2. Press and then tap Device name.3. Edit the current name and tap OK to save the newidentification.ON
