Connections 1536. The external device must accept the connection and enteryour device’s PIN code.Once successfully paired to an external device,displays in the Status area.Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, andfunctions such as transfer or exchange may not be possible with allBluetooth-compatible devices.Disconnecting a Paired Bluetooth DeviceDisconnecting a paired device breaks the connection between thedevice and your phone, but retains the knowledge of the pairing.At a later point when you wish to reconnect the device, there is noneed to setup the connection information again.1. Verify your Bluetooth is active.2. From the Bluetooth settings page, tap the previously paireddevice (from the bottom of the page).3. Tap OK to confirm disconnection.– or –From the Bluetooth settings page, touch and hold the nameof the previously paired device, and select Disconnect.Note: Disconnections are manually done but often occur automatically if thepaired device goes out of range of your phone or it is powered off.Deleting a Paired Bluetooth DeviceDeleting a device from your list removes its “connection record”and upon reconnection would require that you re-enter all theprevious pairing information.1. Verify Bluetooth is active.2. From the Bluetooth settings page, touch and hold the nameof the previously paired device (from the bottom of thepage). This opens the connected device’s menu options.3. Tap Unpair to delete the paired device.Sending Information via BluetoothDepending on your paired devices’ settings and capabilities, youmay be able to send pictures, Contact information, or other itemsusing a Bluetooth connection.Note: Prior to using this feature, Bluetooth must first be enabled on both yourphone and the external device, and the recipient’s device must bevisible.1. Verify your Bluetooth is active and your phone is visible.2. From the Home screen, tap (Contacts).
