Connections 85Scanning and Connecting to a Wi-Fi NetworkWhen you turn on Wi-Fi, your device searches for availableWi-Fi connections, then displays them on screen.1. From a Home screen, touch Apps ➔ Settings.2. Under Wireless and networks, touch to turnWi-Fi ON.3. Your device automatically scans for available WirelessAccess Points. When the scan is complete, touch aWi-Fi network to connect.4. If the Wi-Fi network is open, your device automaticallyconnects. If the Wi-Fi network is secured, enter thepassword at the prompt to connect.Adding a Wi-Fi Network Manually1. From a Home screen, touch Apps ➔ Settings.2. Under Wireless and networks, touch to turnWi-Fi ON.3. Touch Add Wi-Fi network, then enter networkinformation:• Network SSID: Enter the name of the Wi-Fi Wireless AccessPoint (WAP).• Security: Select the type of security used by the WAP.Note: Depending on the Security protocol used by the WAP,additional network information may be required, such asa Password.• Password: If the WAP is secured, enter the password orhex key.• Show advanced options:– Proxy settings: If required, select the appropriate proxy setting.– IP settings: If required, select the appropriate IP setting.4. Touch Connect to save the settings.Configuring Wi-Fi SettingsSet up and configure advanced Wi-Fi settings.1. From a Home screen, touch Apps ➔ Settings.2. Under Wireless and networks, touch to turnWi-Fi ON.3. Touch Menu for options:• Advanced:– Network notification: Have your device alert you to newWireless Access Points (WAPs). Touch Network notificationto turn notifications On or Off.
