Samsung GM85 Quick User Manual
  |
Samsung GM85 Quick User Guide.(Please note that this guide is aimed at enabling a user to perform a basic mobile chest x-rayand is in no way a substitute for full training which includes safety, detector care, cleaning,advanced functions, errors and problem solving)Turning on1. If the unit is off, switch on with the power switch on top (next to the emergency stopbutton).2. Unplug the system from the mains and enter the drive pin to enable movement.3. Log-in to the S-Station to use the unit and release the detector locks.Worklist Screen1. Connect to the network via a cable and obtain the worklist. Prompt the system bypressing refresh (circular arrow, bottom left hand of screen).2. Disconnect from network and head to patient.3. Once by the patient, lift the tube, select patient and press ‘Start Exam’Acquisition Screen1. Make sure the detector is turned on (power button on the side edge of detector)2. Position as normal3. Check exposure factors and expose.Review Screen1. Check the image- If okay, retrieve the detector.- If repeat required, press ‘RETAKE’, select reason for repeat and press okay.2. Shutter, annotate and window image as appropriate.3. Once happy with the image press ‘CONFIRM’ to save changes to the image and thenpress ‘AUTO SEND’ to close the patient and send images to PACS.4. Once back in the department, re-connect the unit to the network cable, images inqueue will now send5. Check status of image Y/N in review tab and image has arrived on PACS.Turning Off1. The mobile unit should always be left plugged in and charging.2. Press and hold power button for 3 seconds until shutdown noise heard3. Lock detectors. |
Related manuals for Samsung GM85
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine