Troubleshooting127Outgoing calls are not connectedEnsure that you have pressed the Dial key.●Ensure that you have accessed the right cellular network.●Ensure that you have not set call barring for the phone●number you are dialling.Incoming calls are not connectedEnsure that your device is turned on.●Ensure that you have accessed the right cellular network.●Ensure that you have not set call barring for the incoming●phone number.Others cannot hear you speaking on a callEnsure that you are not covering the built-in microphone.●Ensure that the microphone is close to your mouth.●If using a headset, ensure that it is properly connected.●Audio quality is poorEnsure that you are not blocking the device’s internal●antenna.When you are in areas with weak signals or poor reception,●you may lose reception. Move to another area and tryagain.When dialling from contacts, the call is not connectedEnsure that the correct number is stored in the contact list.●Re-enter and save the number, if necessary.●Ensure that you have not set call barring for the contact’s●phone number.The device beeps and the battery icon flashesYour battery is low. Recharge or replace the battery tocontinue using the device.
