Samsung GT-E1050 User Manual
Also see for GT-E1050: User manual
  | |
Contents | 
Icon DescriptionSignal strengthCall in progressCall diverting activateSOS message feature activatedRoaming (outside of normal service area)Alarm activatedNew text messageNormal profile activatedSilent profile activatedBattery power levelInstall the SIM card and battery1. Remove the back cover and insert the SIM card.2. Insert the battery and replace the back cover.Charge the battery1. Plug the supplied traveladapter.2. When charging isfinished, unplug thetravel adapter.Do not remove the battery before removing the traveladapter. Doing this may cause damage to the device.Instructional iconsNote: notes, usage tips, or additional information→Followed by: the order of options or menus youmust select to perform a step; for example: InMenu mode, select Messages → Create message(represents Messages, followed by Createmessage)[ ] Square brackets: phone keys; for example: [ ](represents the Power/End key)< >Angled brackets: softkeys that control differentfunctions at each screen; for example: <OK>(represents the OK softkey)Turn your phone on or offTo turn your phone on,1. Press and hold [ ].2. Enter your PIN and press <OK> (if necessary).To turn your phone off, repeat step 1 above.Access menusTo access your phone's menus,1. In Idle mode, select <Menu> to access Menu mode.You may need to press the Confirm key to access Menumode depending on your region or service provider.2. Use the Navigation key to scroll to a menu or option.3. Press <Select>, <OK>, or the Confirm key to confirmthe highlighted option.4. Press <Back> to move up one level; Press [ ] toreturn to Idle mode.When you access a menu requiring the PIN2, you must•enter the PIN2 supplied by the SIM card. For details,contact your service provider.Samsung is not responsible for any loss of passwords•or private information or other damages caused byillegal software.Make a call1. In Idle mode, enter an area code and a phonenumber.2. Press [ ] to dial the number.3. To end the call, press [ ].The volume through mono earphones is very low orvirtually inaudible. Use stereo earphones only.Call a recently dialled number1. In Idle mode, press [ ].2. Scroll left or right to a call type.3. Scroll up or down to a number or name.4. Press the Confirm key to view details of the call or[ ] to dial the number.Answer a call1. When a call comes in, press [ ].2. To end the call, press [ ].Adjust the volumeTo adjust the volume of the ringtone1. In Menu mode, select Settings → Profiles.2. Scroll to the phone profile you are using.If you are using the silent profile, you are not allowedto adjust the volume of the ringtone.3. Press <Options> → Edit.4. Select Volume and scroll to Call alert.5. Scroll left or right to adjust the volume level.6. Press <Save>.To adjust the volume of voice during a callWhile a call is in progress, press the Navigation key upor down to adjust the volume.In noisy environments, you may have difficulty hearingthe calls while using the speakerphone feature. Forbetter audio performance, use the normal phonemode.Change your ringtone1. In Menu mode, select Settings → Profiles.2. Scroll to the profile you are using.If you are using the silent, meeting, or offline profile,you are not allowed to change the ringtone.3. Press <Options> → Edit.4. Select Call ringtone.5. Select a ringtone.To switch to another profile, select it from the list.Use the shortcut toolbarYou can use the shortcut toolbar to access your favouritemenus.To add menus on the shortcut toolbar1. In Menu mode, select Settings → Display →Shortcuts toolbar.2. Press <Options> → Edit.3. Select your favourite menus.4. Press <Options> → Open to select submenus(if necessary).5. Press <Save>, or press <Options> → Save.To access a menu from the shortcut toolbarIn Idle mode, scroll left or right to the menu you want andpress the Confirm key.When the shortcut toolbar is activated, the Navigationkey does not work as shortcuts depending on yourregion.Enter textTo change the text input modePress and hold [• ] to switch between T9 and ABCmodes. Depending on your country, you may be ableto access an input mode for your specific language.Press [• ] to change case or switch to Number mode.Press [• ] to switch to Symbol mode.Press and hold [• ] to select an input mode or changethe input language.T9 mode1. Press the appropriate alphanumeric keys to enter anentire word.2. When the word displays correctly, press [0] to inserta space. If the correct word does not display, pressthe Navigation key up or down to select an alternateword.ABC modePress an appropriate alphanumeric key until thecharacter you want appears on the display.Number modePress an appropriate alphanumeric key to enter anumber.Symbol modePress an appropriate alphanumeric key to enter asymbol.To move the cursor, press the Navigation key.•To delete characters one by one, press <• Clear>. Todelete all of the characters, press and hold <Clear>To insert a space between characters, press [• 0].To enter punctuation marks, press [• 1].Add a new contactThe memory location to save new contacts may bepreset depending on your service provider. To changethe memory location, in Menu mode, select Settings→ Application → Contacts → Save new contacts to→ a memory location.1. In Idle mode, enter a phone number and press<Options>.2. Select Create contact.3. Select a number type (if necessary).4. Enter contact information.5. Press the Confirm key to add the contact to memory.Send and view messagesTo send a text message1. In Menu mode, select Messages → Createmessage.2. Enter a destination number and scroll down.3. Enter the message text. ► Enter text4. Press the Confirm key to send the message.To view text messages1. In Menu mode, select Messages → Inbox.2. Select a text message.Make fake callsYou can simulate an incoming call when you want to getout of meetings or unwanted conversations.To make a fake callPress and hold the Navigation key down in Idle•mode.Press the Navigation key down four times when the•keys are locked.Activate the mobile trackerThis feature helps track your phone when it is stolenor when someone tries to use your phone using otherSIM card, the phone will automatically send the presettracking message to family or friends. This feature maybe unavailable due to certain features supported byyour service provider.1. In Menu mode, select Settings → Security →Mobile tracker.2. Enter your password and select OK.The first time you access Mobile tracker, you will beprompted to create and confirm a password.3. Scroll left or right to On.4. Scroll down and press the Confirm key to open therecipient list.5. Press the Confirm key to open your contact list.6. Select a contact.7. Select a number (if necessary).8. Press <Options> → Save to save the recipients.9. Scroll down and enter the sender's name.10. Press the Confirm key → <Accept>.Activate and send an SOS messageIn an emergency, you can send SOS messages to yourfamily or friends for help.To activate the SOS message1. In Menu mode, select Messages → Settings →SOS messages → Sending options.2. Scroll left or right to On.3. Scroll down and press the Confirm key to open therecipient list.4. Press the Confirm key to open your contact list.5. Select a contact.6. Select a number (if necessary).7. When you are finished selecting contacts, press<Options> → Save to save the recipients.8. Scroll down and set the number of times to repeat theSOS message.9. Press <Save> → <Yes>.To send an SOS message1. With the keys locked, press [ ] four times to sendan SOS message to preset numbers.The phone switches to SOS mode and sends thepreset SOS message.2. To exit SOS mode, press [ ].Set and use alarmsTo set a new alarm1. In Menu mode, select Alarms.2. Select an empty alarm location.3. Set alarm details.4. Press <Save>, or press <Options> → Save.To stop an alarmWhen the alarm sounds,Press <• OK> or the Confirm key to stop the alarmwithout snooze.Press <• OK> or the Confirm key to stop the alarm withsnooze, or press <Snooze> to silence the alarm forthe snooze period.To deactivate an alarm1. In Menu mode, select Alarms.2. Select the alarm you want to deactivate.3. Scroll left or right to Off.4. Press <Save>.If the battery has been removed, the scheduled alarmmay not sound.Activate the torch lightThe torch light feature helps you see in dark places bymaking the display and backlight as bright as possible.To activate the torch light, press and hold the Navigationkey up in Idle mode.To deactivate the torch light, press <Back>.BatteryBack cover SIM cardTo AC power outletDeclaration of ConformityProduct detailsFor the followingProduct : GSM Mobile PhoneModel(s) : GT-E1050Declaration & Applicable standardsWe hereby declare, that the product above is in compliance with the essentialrequirements of the R&TTE Directive (1999/5/EC) by application of:SAFETY EN 60950-1 : 2006 + A12 : 2011SAR EN 50360 : 2001 / AC 2006EN 62209-1 : 2006EN 62209-2 : 2010EN 62311 : 2008EMC EN 301 489-01 V1.9.2 (09-2011)EN 301 489-07 V1.3.1 (11-2005)RADIO EN 301 511 V9.0.2 (03-2003)and the Directive (2011/65/EU) on the restriction of the use of certain hazardoussubstances in electrical and electronic equipment.The conformity assessment procedure referred to in Article 10 and detailed inAnnex[IV] of Directive 1999/5/EC has been followed with the involvement of thefollowing Notified Body(ies):TÜV SÜD BABT, Octagon House, Concorde Way, Fareham,Hampshire, PO15 5RL, UK*Identification mark: 0168Representative in the EUSamsung Electronics Euro QA Lab.Blackbushe Business Park, Saxony Way,Yateley, Hampshire, GU46 6GG, UK2013.05.03 Joong-Hoon Choi / Lab. Manager(Place and date of issue) (Name and signature of authorised person)* This is not the address of Samsung Service Centre. For the address or the phone number ofSamsung Service Centre, see the warranty card or contact the retailer where you purchasedyour product.Your phone displays the following status indicators onthe top of the screen: |
Related manuals for Samsung GT-E1050
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine