Connectivity103› Connect to a WLAN using a Wi-Fi ProtectedSetup (WPS)Using WPS, you can connect to a secured network.To connect to a WLAN with a WPS button,In Idle mode, open the application list and select1 Settings→ Wireless and network → Wi-Fi settings.Select2 WPS button connection.Press a WPS button on the access point within 2 minutes.3To connect to a WLAN with a WPS PIN,In Idle mode, open the application list and select1 Settings→ Wireless and network → Wi-Fi settings.Select a network indicated by the WPS icon and select2 WPS PIN.On the access point, enter the PIN and press the start3 button.AllShareLearn to use the Digital Living Network Alliance (DLNA)service that enables you to share media files between DLNA-enabled devices in your home over a WLAN.You must first activate the WLAN feature and add a WLANprofile. ► p. 102The supported file formats may vary depending on●the software of the device.Some files may not play on the DLNA-enabled devices●depending on the devices.
