Utilities101Reading VOICEYE codesBefore reading a VOICEYE code, tap Setting and tick Scanning sound to set the device toemit a sound when scanning a code. Tick Decoding sound to set the device to emit a soundwhen the scan is finished.Tap Scan and place the rear camera 5-10 cm from a VOICEYE code. The content embedded inthe code appears on the screen.The device may not recognise VOICEYE codes in low light conditions. Use this featurein places with sufficient light.Using a magnifierTap Magnifier, aim the rear camera at some text, and then use one of the following:• / : Adjust the magnification.• : Focus on a subject.• : Freeze the live-view screen.• : Change the display colours and adjust the contrast to make the text appear clearer.To adjust the contrast, tap / .• : Turn on the flash.Light SensingUse this application to detect the brightness of an area via the rear camera.Tap Light Sensing on the Applications screen.Aim the rear camera at an area. The device indicates the brightness of the area by displaying acircle on the screen and emitting beeps or vibrating.The brighter the area is, the larger the circle on the screen becomes. The beeps emitted by thedevice also become higher pitched and faster paced. The darker the area is, the smaller thecircle on the screen becomes. The beeps emitted by the device also become lower pitchedand slower paced. If the device is in silent mode, the device vibrates faster when the area isbrighter or slower when the area is darker.
