Samsung GT-I9205 User Manual

Also see for GT-I9205: User manual

Contents

Media77Controlling the camera remotelySet a device as a viewfinder to control the camera remotely.Tap Remote viewfinder, and then connect the device and the camera usingWi-Fi Direct or NFC. Tap to take a photo remotely using the device as a viewfinder.Configuring settings for CameraTap to configure settings for Camera. Not all of the following options are availablein both still camera and video camera modes. The available options vary depending on themode used.• Photo size / Video size: Select a resolution. Use higher resolution for higher quality. But ittakes up more memory.• Face detection: Set the device to recognise people’s faces and help you take photos ofthem.• Metering: Select a metering method. This determines how light values are calculated.Centre-weighted measures background light in the centre of the scene. Spot measuresthe light value at a specific location. Matrix averages the entire scene.• ISO: Select an ISO value. This controls camera light sensitivity. It is measured in film-camera equivalents. Low values are for stationary or brightly-lit objects. Higher values arefor fast-moving or poorly-lit objects.• Anti shake: Activate or deactivate anti-shake. Anti-shake helps focus when the camera ismoving.• Save as: Set the device to delete the original photo when taking photos with rich tonemode.• GPS tag: Attach a GPS location tag to the photo. Activate this feature when taking photosto create albums in Story Album.• To improve GPS signals, avoid shooting in locations where the signal may beobstructed, such as between buildings or in low-lying areas, or in poor weatherconditions.• Your location may appear on your photos when you upload them to the Internet.To avoid this, deactivate the GPS tag setting.