Media80Controlling the camera remotelySet the device as a viewfinder to control the camera remotely.Tap → → Remote viewfinder, and then connect the device and the camera usingWi-Fi Direct or NFC. Tap to take a photo remotely using the device as a viewfinder.Configuring settings for CameraTap → to configure settings for Camera. Not all of the following options are availablein both still camera and video camera modes. The available options vary depending on themode used.• Photo size / Video size: Select a resolution. Use higher resolution for higher quality. But ittakes up more memory.• Burst shot: Take a series of photos of moving subjects.• Face detection: Set the device to recognise people’s faces and help you take photos ofthem.• Metering modes: Select a metering method. This determines how light values arecalculated. Centre-weighted measures background light in the centre of the scene. Spotmeasures the light value at a specific location. Matrix averages the entire scene.• ISO: Select an ISO value. This controls camera light sensitivity. It is measured in film-camera equivalents. Low values are for stationary or brightly-lit objects. Higher values arefor fast-moving or poorly-lit objects.• Anti shake / Video stabilisation: Activate or deactivate anti-shake. Anti-shake helpsfocus when the camera is moving.• Auto night detection: Set the device to automatically detect darker conditions andadjust the brightness of the photo without the flash.• Save as: Set the device to save both the rich tone photo and original photo, or only therich tone photo.
