Connectivity131› Connect to a Wi-Fi AP using a Wi-Fi ProtectedSetup (WPS)Using WPS, you can connect to a secured network.To connect to a Wi-Fi AP with a WPS button,In Idle mode, open the application list and select1 Settings→ Wi-Fi.Select a network indicated as protected network available,2 and select the tick box next to Show advanced options.Select the3 WPS drop-down menu.Select4 Push button → Connect.Press a WPS button on the access point within 2 minutes.5To connect to a Wi-Fi AP with a WPS PIN,In Idle mode, open the application list and select1 Settings→ Wi-Fi.Select a network indicated as protected network available,2 and select the tick box next to Show advanced options.Select the3 WPS drop-down menu.Select4 PIN from access point or PIN from this device →Connect.On the access point, press the WPS button or enter the PIN5 of your device.Set the static IP settings› In Idle mode, open the application list and select1 Settings→ Wi-Fi.Select a network, and select the tick box next to2 Showadvanced options.
