Samsung GT-P1010/M16 User Manual

Also see for Galaxy Tab GT-P1010: Service manual

Connectivity48BluetoothBluetooth is a short-range wireless communications technology capable ofexchanging information over a distance of about 10 m without requiring aphysical connection.You do not need to line up the devices to beam information withBluetooth. If the devices are within range of one another, you can exchangeinformation between them even if they are located in different rooms.Samsung is not responsible for the loss, interception, or misuse of•data sent or received via the Bluetooth wireless feature.Always ensure that you share and receive data with devices that•are trusted and properly secured. If there are obstacles betweenthe devices, the operating distance may be reduced.Some devices, especially those that are not tested or approved by•Bluetooth SIG, may be incompatible with your device.› Turn on the Bluetooth wireless featureIn Menu mode, select1 Settings → Wireless and network → Bluetoothsettings.Select2 Bluetooth to turn on the Bluetooth wireless feature.Find and pair with other Bluetooth-enabled devices› In Menu mode, select1 Settings → Wireless and network → Bluetoothsettings → Scan devices.Select a device.2Add a WLAN manually› In Menu mode, select1 Settings → Wireless and network → Wi-Fisettings → Add Wi-Fi network.Enter the SSID for the network and select the security type.2 Set the security settings depending on the selected security type.3 Select4 Save.Connect to a WLAN using a Wi-Fi Protected Setup› (WPS)You can connect to a secured network by using a WPS button or WPS PIN.To connect to a WLAN with a WPS button,In Menu mode, select1 Settings → Wireless and network → Wi-Fisettings → WPS button connection.Press a WPS button on the access point within 2 minutes.2To connect to a WLAN with a WPS PIN,In Menu mode, select1 Settings → Wireless and network → Wi-Fisettings.Select a network indicated by the WPS icon and select2 WPS PIN.On the access point, enter the PIN and press the start button.3