Connectivity99Set the static IP settings› Open the application list and select1 Settings → Wirelessand networks → Wi-Fi settings.Select an access point on the network list.2Select the drop-down menu next to3 IP settings.Select4 Static.Change the IP settings for the access point such as IP5 address, Network prefix length, Gateway, DNS.Select6 OK.Wi-Fi DirectLearn to use the Wi-Fi Direct feature to connect two devicesvia Wi-Fi without requiring an access point.Connect your device to another device› Open the application list and select1 Settings → Wirelessand networks → Wi-Fi Direct settings → OK → Wi-FiDirect.Select2 → Scan.Select a device and then select3 Connect.When the owner of the other device accepts theconnection, the devices are connected.
