Connectivity101Connect to a Wi-Fi AP using a Wi-Fi Protected› Setup (WPS)Using WPS, you can connect to a secured network.To connect to a Wi-Fi AP with a WPS button,In Idle mode, open the application list and select1 Settings→ Wireless and network → Wi-Fi settings.Select2 WPS button connection.Press a WPS button on the access point within 2 minutes.3To connect to a Wi-Fi AP with a WPS PIN,In Idle mode, open the application list and select1 Settings→ Wireless and network → Wi-Fi settings.Select a network indicated by the WPS icon and select2 WPS PIN.On the access point, enter the PIN and press the start3 button.Wi-Fi DirectLearn to use the Wi-Fi Direct feature to connect two devicesvia a Wi-Fi network without requiring an access point.Connect your device to another device› In Idle mode, open the application list and select1 Settings→ Wireless and network → Wi-Fi Direct settings → OK→ Wi-Fi Direct.Press [2 ] → Scan.Select a device and then select3 Connect.When the owner of the other device accepts theconnection, the devices are connected.
