Samsung GX-SM530CF User Manual

Also see for GX-SM530CF: Product highlights User manual

Contents

14. Select Close, and then press the v button. The Connect RF Cable screenappears.15. If you have not installed a CableCARD and not connected a Tuning Adaptor, goto Step 16. If you have installed a CableCARD, but have not connected a TuningAdaptor, go to Step 18. If you have installed a CableCARD and connected a TuningAdapter, go to Step 19.16. If you have not connected the RFcable from your cable outlet toyour product, do it now. Once youhave connected the cable, pressthe ▶ button, and then press thev button. If you have alreadyconnected the RF cable, press the▶ button, and then press the vbutton.\ The RF cable connects your product to the video transmissions from yourcable company. If you don’t use an RF cable, select “I don’t use an RF cable”at the bottom of the screen, and then go to Step 26. Note that without anRF cable connection, you won’t be able to watch TV broadcasts.If you have no network or have not connected the product to your network,go to Step 23.17. If your cable company provideda CableCARD, insert the card intothe slot on the back of the SmartMedia Player. The “CableCARDis inserted” message appears.Press the v button, and thengo to Step 18. If your CableCARDis already installed, press the vbutton, and then go to Step 18. Ifyou did not get a CableCARD orwant to use your product withouta CableCARD, select "I don't use aCableCARD". Then, press the vbutton, and go to Step 23.18. If your cable company provideda Tuning Adapter (SDV), and youhave not connected it, connect itto the Smart Media Player now.When done, press the ▶ button,and then press the v button.The Zip Code screen appears. Foradditional information about thethe Tuning Adapter, refer to theusers manual provided by yourCable Service Provider.\ Do not connect the USB cableto the Tuning Adapter and theSmart Media Player until afterthe Tuning Adapter LED light issolid.19. Enter your Zip Code into the ZipCode field using the numberbuttons on the remote. If youmake a mistake, press the ◀button to delete the mistake.When done, press the v button.20. In the list that appears, select yourcable provider, and then pressthe v button. The Confirmationwindow appears.21. Press the v button to confirmthe information is correct.Settings  The Setup Procedure23