139Displays when connected to another device usingWi-Fi Direct. For more information, refer to “Wi-FiDirect” on page 139.Wi-Fi Advanced SettingsThe Advanced Wi-Fi menu allows you to set up many of yourdevice’s advanced Wi-Fi services.1. From the Home screen, tap ➔ Settings ➔Connections ➔ Wi-Fi.2. Press ➔ Advanced.The following options are available:• Network notification: alerts you when a new WAP is available.• Passpoint: allows you to connect to passpoint-enabled Wi-FiAccess Points automatically. Touch and slide the slider to theright to turn it on .• Keep Wi-Fi on during sleep: allows you to specify when todisconnect from Wi-Fi.• Check for Internet service: Checks if Wi-Fi internet service isavailable when connected to an AP (Access Point).• Auto connect: allows you to be automatically connected to anAT&T Wi-Fi Hotspot as soon as your phone detects it.• MAC address: view your device’s MAC address, requiredwhen connecting to some secured networks (not configurable).• IP address: view your device’s IP address.Wi-Fi DirectWi-Fi Direct allows device-to-device connections so you cantransfer large amounts of data over a Wi-Fi connection.Note: See your service plan for applicable charges for Wi-FiDirect.1. From the Home screen, tap ➔ Settings ➔Connections ➔ Wi-Fi.2. Tap the ON/OFF slider, located to the right of the Wi-Fifield, to turn Wi-Fi ON .3. At the bottom of the Wi-Fi screen, tap the Wi-Fi Directbutton.4. Repeat steps 1 - 3 on the other device you want toconnect with. The steps on a different model of phone,may be different.5. On your phone, tap Scan.The device scans for other Wi-Fi Direct devices.
