3. The network names and security settings (Open network or Secured with xxx) ofdetected Wi-Fi networks are displayed. When you select an open network, you will be automatically connected to thenetwork. When you select a secured network, you will need to enter the wireless password toconnect to the network. Enter the password and touch Connect. You can use theshow password option to display the password as you enter it.Manually Add a New Network Connection1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.3. Touch Add Wi-Fi network.4. Enter the Network SSID. This is the name of your Wi-Fi network.5. Touch the Security field and select a security option. This must match the currentsecurity setting on your target network.6. Touch Connect to store the new information and connect to the Wi-Fi network.Note: The next time your device connects to a previously accessed or secured wirelessnetwork, you are not prompted to enter the wireless password again, unless you reset yourdevice back to its factory default settings.Scan for a Wi-Fi Network1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.3. Touch Scan.Wi-Fi SettingsFor information about configuring Wi-Fi settings, see Wi-Fi Settings.Wi-Fi DirectWi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi networkor hotspot, and without having to set up the connection. For example, your phone can use Wi-FiDirect to share photos, contacts and other content with other Wi-Fi Direct devices.1. Press and then touch > Settings > Connections tab.2. Touch OFF/ON to turn Wi-Fi on, then touch Wi-Fi.Web and Data 87
