Note: The display language is preset to English at the factory.To change the language, use the Language menu. Formore information, refer to “Settings” on page 162.To turn your phone off:1. Press and hold the Power/Lock Key untilthe Device options screen displays.2. Touch Power off to turn off the phone.3. At the Power off prompt, touch OK.Locking and Unlocking the TouchScreen1. Press to lock the touch screen.2. Press again to display the lock screenthen swipe your finger across the screen to unlock.Note: Swipe is the default screen locking method. To changeyour screen lock, see “Lock Screen” on page 174.Setting Up Your PhoneWhen you first turn on your phone, you are asked to set up afew things. To do that, several screens display. Somescreens can be skipped (touch Skip) or re-displayed (touchBack). Some screens display depending on the options youchoose.1. When you first turn on your phone, the Let’s set up yourdevice! screen displays.2. The default language for your phone is English. If youwould like to select Spanish, touch Español on thebottom right-hand side of the screen.3. Touch Terms & Conditions, read the End User LicenseAgreement for Ready2Go, then touch Back.4. Touch get started.– or –Touch Remind Later and then touch exit to set up yourphone later. You can access Ready2Go by touchingApps ➔ AT&T Ready2Go.5. Read and follow the instructions on each screen to setup your phone.Getting Started 12
