1. Plug the flat end of the USB charger into the Power/Accessory Interface connector and the other end into astandard AC wall outlet.2. When charging is finished, remove the flat end fromthe interface connector jack on the phone.Warning! If your handset has a touch screen display, note thata touch screen responds best to a light touch fromthe pad of your finger. Using excessive force or ametallic object when pressing on the touch screenmay damage the tempered glass surface and voidthe warranty. For more information, refer to“Standard Limited Warranty” on page 191.Note: Failure to unplug the wall charger before you remove thebattery, can cause damage to the phone.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk timeremain, the battery icon ( ) blinks and the device sounds awarning tone at regular intervals. In this condition, yourphone conserves its remaining battery power, not by turningoff the backlight, but by entering the dimming mode. For aquick check of your battery level, glance at the batterycharge indicator located in the upper-right corner of yourdevice’s display. Solid color ( ) indicates a full charge.When the battery level becomes too low, the phoneautomatically turns off.Getting Started 10
