Basics5Maintaining water and dust resistanceYour device supports water- and dust-resistance. Follow these tips carefully to maintain thewater- and dust-resistance of your device. Failure to do so may result in damage to yourdevice.• Do not immerse the device in fresh water deeper than 1.5 m or keep it submerged formore than 30 minutes. If you immerse the device in any liquid other than fresh water,such as salt water, ionised water, or alcoholic beverage, liquid will enter the device faster.• Do not expose the device to water moving with force.• If the device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If thedevice is exposed to other liquids, such as salt water, ionised water, or alcoholic beverage,rinse it with fresh water and dry it thoroughly with a clean, soft cloth. If you do not followthese instructions, the device’s performance and appearance may be affected.• If the device has been immersed in water or the microphone or speaker is wet, soundmay not be heard clearly during a call. After wiping the device with a dry cloth, dry itthoroughly before using it.• The touchscreen and other features may not work properly if the device is used in water.• If the device is dropped or receives an impact, the water- and dust-resistant features ofthe device may be damaged.• Your device has been tested in a controlled environment and certified to be water-and dust-resistant in specific situations (meets requirements of classification IP68 asdescribed by the international standard IEC 60529-Degrees of Protection provided byEnclosures [IP Code]; test conditions: 15-35 °C, 86-106 kPa, fresh water, 1.5 metre, 30minutes). Despite this classification, it is still possible for your device to be damaged incertain situations.Instructional iconsWarning: situations that could cause injury to yourself or othersCaution: situations that could cause damage to your device or other equipmentNotice: notes, usage tips, or additional information