Changing Your Settings 98WPS Button ConnectionThe WPS (Wi-Fi Protected Setup) button is a standard for easyand secure wireless network set up and connections. To useWPS, the connecting device must support WPS and becompatible with Wi-Fi Protected Access (WPA) security. WPS canautomatically set up a random network name and WPA wirelesssecurity for wireless Wi-Fi phones, routers, access points,computers, adapters, and other electronic devices.WPS allows you to push buttons instead of entering a networkname and wireless security PIN.1. From the Home screen, tap ➔ Settings ➔ Wirelessand network ➔ Wi-Fi settings.2. Tap WPS button connection.3. Press the WPS button on your Wi-Fi access point within 2minutes.Auto connectThe Auto connect option allows you to be automaticallyconnected to an AT&T Wi-Fi Hotspot as soon as your phonedetects it.1. From the Home screen, tap ➔ Settings ➔ Wirelessand network ➔ Wi-Fi settings.2. Tap Auto connect to create a check mark.Auto connect is enabled.Activating Wi-Fi DirectWi-Fi Direct allows device-to-device connections so you cantransfer large amounts of data over a Wi-Fi connection.1. From the Home screen, tap ➔ Settings ➔ Wirelessand network ➔ Wi-Fi Direct settings.2. On your phone, at the Scan for devices prompt, tap OK. Tapthe Do not show again checkbox if you want to skip thisstep in the future.3. Tap Wi-Fi Direct. A check mark displayed indicates Wi-FiDirect is active. For more information, refer to “Wi-FiDirect” on page 132.Bluetooth settingsIn this menu you can activate Bluetooth, view or assign a devicename, activate your phone so other Bluetooth devices candiscover it, or scan for other, available Bluetooth devices withwhich to pair.
