Tools and Calendar 174Text-to-SpeechThis feature allows the device to provide a verbal readout of onscreen data such as messagesand incoming caller information (based on Caller ID).Text-to-Speech Settings1. Press > and tap > Voice input and output > Text-to-speechsettings.2. Configure the available options to alter the settings associated with this feature. Listen to an example plays a short example of what the text-to-speech feature willsound like on your device when activated. Driving mode: allows incoming calls and new notifications to be read outautomatically. Driving mode settings: allows you to choose exactly what information is read outautomatically. Always use my settings overrides any conflicting application settings with thoseyou set up within this text-to-speech settings screen. If enabled and available as afeature, your device will default to using the text-to-speech feature. Default engine sets the speech synthesis engine used for the spoken text. Default isPico TTS. Install voice data confirms the installation of necessary data required for voicesynthesis. Tap this to download and install the free app from Android market.Important: Before initial use, activate the Install voice data function to properly activate anduse the text-to-speech feature. Speech rate adjusts the rate at which onscreen text is spoken by the device.Choose from: Very slow, Slow, Normal, Fast, and Very fast. Language assigns the language used by the verbal readout. Choose from English(United States) or Spanish (Spain). Samsung TTS allows you to modify settings for the Samsung TTS default engine PicoTTS assigns the TTS settings. These settings must be obtained from theAndroid Market.3. Press to return to the previous screen.
