Vibrate on connection to network: When enabled, your phone will vibrate when acall connects to the network. Call-end vibration: When enabled, the phone vibrates when the other caller endsthe call. Call connect tone: When enabled, the phone plays a tone when the other calleranswers a call. Minute minder: When enabled, a tone plays once per minute during a call. Call end tone: When enabled, the device plays a tone when the other caller endsthe call. Alerts on call: When enabled, notifications for alarms and new messages playduring calls. When disabled, these notifications will be muted during a call.Call AccessoriesConfigure options for using a headset for calling.1. Press and then tap > Settings > My device.2. Tap Call, and then tap Call accessories to configure settings: Automatic answering: When enabled, and you have a headset connected to theHeadset Jack, incoming calls are answered automatically after a delay, which youcan set at Automatic answering timer. Tap to enable or disable the setting. Automatic answering timer: Choose a time period to delay before automaticallyanswering an incoming call when Automatic answering is enabled and a headset isconnected to the device. Tap to choose 2 seconds, 5 seconds, or 10 seconds. Outgoing call conditions: When the device is paired with a Bluetooth headset, youcan choose to make calls even when the device is locked. Tap to choose Evenwhen device locked, or Only when device unlocked.Ringtones and Keypad TonesChoose tones and vibrations to play for incoming calls and keypad taps.1. Press and then tap > Settings > My device.2. Tap Call, and then tap Ringtones and keypad tones to configure settings: Tap Ringtones, and then select a ringtone for incoming calls. Tap OK to save yourselection.Settings 125
