USB DebuggingWhen enabled, allows debugging when the device isattached to a PC by a USB cable.1. From the main Settings page, tap Developer options.2. Tap USB debugging to enable or disable the setting.When enabled, a check mark appears in the check box.Allowing Mock LocationsNote: This feature is used for development purposes only.If you are a developer who is testing a GPS applications usingthis device, you can tell the device that the phone is atdifferent GPS locations. In other words, the phone is allowedto “mock” the coordinates.1. From the main Settings page, tap Developer options.2. Verify the Developer options are active.3. Tap Allow mock locations to enable or disable thesetting. When enabled, a check mark appears in thecheck box.Desktop Backup PasswordProtect the desktop with a backup password ID.1. From the main Settings page, tap Developer options2. Verify the Developer options are active.3. Tap Desktop backup password.4. In the Settings screen, enter the current full backuppassword, the new password for full backups, thenenter the new password again.5. Tap Set backup password to save the passwordchange.Application Options1. From the main Settings page, tap Developer options.2. Verify the Developer options are active.3. Tap Do not keep activities to destroy every activity assoon as the application is closed.4. Tap Limit background processes to set the number ofprocesses that can run in the background. Options are:Standard limit, No background processes, and 1 to 4processes at most.Changing Your Settings 292
