Getting Started 10Using the Travel ChargerImportant! Verify that the handset battery is installed prior toconnection. If the battery is not properly installedand the wall charger is connected, the handsetmay power off and on continuously, preventingproper operation.1. Lift up on the plastic protector that covers the port onthe bottom of your phone and swing it open (1).2. Plug the flat end of the Travel Charger into the Power/Accessory Interface port (2) and the other end into astandard AC wall outlet.3. When charging is finished, remove the flat end fromthe interface connector port on the phone.Warning! Please note that a touch screen responds best to alight touch from the pad of your finger. Usingexcessive force or a metallic object when pressingon the touch screen may damage the temperedglass surface and void the warranty. For moreinformation, refer to “Standard Limited Warranty”on page 236.Note: Failure to unplug the wall charger before you remove thebattery, can cause damage to the phone.Low Battery IndicatorWhen the battery is weak and only a few minutes of talk timeremain, the battery icon ( ) blinks and the device sounds awarning tone at regular intervals. In this condition, yourphone conserves its remaining battery power, not by turningoff the backlight, but by entering the dimming mode. For aCorrectIncorrect
