Web and Data 101 When you select a secured network, you will need to enter the wireless password toconnect to the network. Enter the password and tap Connect. You can use theshow password option to display the password as you enter it.Manually Add a New Wi-Fi Network Connection1. Press and then tap > Settings > Wi-Fi.2. Tap Add Wi-Fi network.3. Enter the Network SSID. This is the name of your Wi-Fi network.4. Tap the Security field and select a security option. This must match the current securitysetting on your target network.5. Tap Save to store the new information and connect to the Wi-Fi network.Note: The next time your phone connects to a previously accessed or secured wirelessnetwork, you are not prompted to enter the wireless password again, unless you resetyour phone back to its factory default settings.Manually Scan for a Wi-Fi Network1. Press and then tap > Settings > Wi-Fi.2. Tap Scan.Check the Wireless Network StatusCheck the status of your current wireless network, including speed and signal strength, throughthe Settings menu.1. Press and then tap > Settings > Wi-Fi.2. Tap the Wi-Fi network that the phone is currently connected to. You will see a messagebox showing the Wi-Fi network name, status, speed, signal strength, and other details.Note: If you want to remove the phone’s wireless network settings, tap Forget on this window.You need to enter the settings again if you want to connect to this wireless network.3. The following Status bar icons show your Wi-Fi connection status at a glance: Wi-Fi is connected and active. Wi-Fi active but there is a communication issue with the target Wireless AccessPoint (WAP).
