54Connecting and Using a Source Device22 Connecting and Using a Source Device2.4 Connecting to a COMMON INTERFACE slot2.4.1 Using the “CI or CI+ CARD”To watch paid channels, the “CI or CI+ CARD” must be inserted.z If you don’t insert the “CI or CI+ CARD,” some channels will display the message “ScrambledSignal”.z The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID andother information will be displayed in about 2~3 minutes. If an error message is displayed, pleasecontact your service provider.z When the configuration of channel information has finished, the message “Updating Completed” isdisplayed, indicating the channel list is updated.z You must obtain a “CI or CI+ CARD” from a local cable service provider.z When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI orCI+ CARD” may cause damage to it.z Insert the “CI or CI+ CARD” in the direction marked on the card.z The location of the "COMMON INTERFACE" slot may be different depending on the model.z “CI or CI+ CARD” is not supported in some countries and regions; check with your authorizeddealer.z If you have any problems, please contact a service provider.z Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distortedor will not be seen.