Picture ControlYou can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”and “Tint” according to personal preference. (Alternatively, you can use one of the automaticsettings. See next page.)OperationEnglish - 34Customizing the Picture1 Press the MENU button.Press the … or † button toselect “Picture”, then pressthe ENTER button.2 Press the ENTER button toselect “Mode”.3 Press the … or † button toselect a particular item, thenpress the ENTER button.Press the œ or √ button toincrease or decrease thevalue of a particular item.Resetting the Picture Settings to the Factory DefaultsYou can return to the factory default picture settings.4 Press the MENU button todisplay the “Mode” menu.Press the … or † button toselect “Reset”, then press theENTER button.The previously adjustedpicture settings will be resetto the factory defaults.▲Contrast▼90PictureMode : Standard √Color Tone : Warm1 √Size : Wide √Digital NR : Off √DNIe : On √My Color Control √Film Mode : Off √PIP √Move Enter ReturnInputPictureSoundChannelSetupModeMode : Standard √Contrast 90Brightness 50Sharpness 50Color 50Tint 50 50ResetMove Enter ReturnInputPictureSoundChannelSetupNOTE• “Tint” doesn’t operatein PC, DVI, HDMI or480p-Component orhigher modes.ModeMode : Standard √Contrast 90Brightness 50Sharpness 50Color 50Tint 50 50ResetMove Enter ReturnInputPictureSoundChannelSetup
