Connectinga (abJe(enverter Be×This connection allows you to watch cable and premium channels. You should keep your TVselected to "ANT 1 IN" so that you can use the TV features. When viewing premium channels,select "ANT 2 IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in your area),then use the converter box to change channels. You will need two coaxial cables.From CableCable converter boxNOTES• When you use a converter box withyour TV, there may be features that youcan not program using the remotecontrol, such as programming yourfavorite channels and blockingchannels.• The output from "ANT 1 OUT" isavailable when "Ant.2" is selected inthe "Antenna" channel menu.(onne_:tinga (abb (onverter Box and a V(RThis connection allows you to watch and record basic and premium cable channels, as wall aswatch videotapes. You should keep your TV selected to "ANT 1 IN" so that you can use the TV'sfeatures. When viewing premium channels or recording with the VCR, select "ANT 2 IN"(whichever channel is vacant in your area), then use the converter box to change channels."IV Rear Panel Caution: If you want to record one channelwhile watching another channel, a splitter(not included) must be added belween thecable and "ANT 1 IN". One output of thesplitter goes to "ANT 1 OUT" and thesecond output is connected to IN on thecable converter box.From Cable If you have a mono VCR, connect L/Monoto VCR Audio OUT using only one audiocable.Cable converter boxIf you have a S-VHS VCR, use the S-Videoconnections and remove the video cable.Do not connect the video cable and theS-Video cable to video1 simultaneously.Stereo VCRWhen you use a converter box with yourTV there may be features that you can notprogram using the remote control, such asprogramming your favorite channels andblocking channels.EngJish - 17