English - 43HDMI/DVI InputResolution(Dot X Line)Horizontalfrequency (kHz)Verticalfrequency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)640 x 480 31.47 60.00 25.18 - /-640 x 350 31.47 70.10 25.18 +/-720 x 400 31.47 70.00 28.32 - /+800 x 600 37.88 60.30 40.00 +/+1024 x 768 48.36 60.00 65.00 - /-1280 x 720 45.00 60.00 74.18 - /-➢ • When this TV is used as a PC display, 32-bit color is supported.• Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version ofWindows.) Check your PC instruction book for information about connecting your PC to a TV.• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHz (horizontal).• In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC isdisconnected). If so, press the SOURCE button on the remote control or side panel to enter a VIDEO mode.Also, make sure that the PC is connected.Setting up the TV with your PCHow to Auto AdjustUse the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.The function also automatically fine-tunes the settings and adjusts the frequency values and positions.➢ This function does not work in DVI-Digital mode.➢ Change to the PC mode first.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.Press the ▲ or ▼ button to select PC, then press the ENTER button.2 Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER button.The message Auto Adjustment in Progress. Please wait. appears on the screen and thepicture adjustments are automatically activated.Press the EXIT button to exit.PictureMove Enter ReturnMoreMenu Transparency : Medium ►Blue Screen : Off ►Melody : Low ►PC ►Home Theater PC : Off ►HDMI Black Level : Low ►More▲Move EnterSetupPictureMove Enter ReturnImage Lock ►Position ►Auto AdjustmentImage ResetResolution : 1024 x 768 @60HzMove EnterPCAuto Adjustment in ProgressPlease wait.ReturnReturn
