Samsung HM1350 Quick Start Manual
Safety precautionsTo prevent injury to yourself and others or damage to your device, read the safety informationabout your device before using the device.• Comply with all safety warnings and regulations regarding mobile device usage whileoperating a vehicle.• Do not disassemble, modify, or repair your device. Any changes or modifications to yourdevice can void your manufacturer’s warranty. If your device needs servicing, take yourdevice to a Samsung Service Centre.• Do not bite or suck the device. Children or animals can choke on small parts.• Do not store your device in very hot or very cold areas. It is recommended to use your deviceat temperatures from 5 °C to 35 °C. Extreme temperatures can damage the device andreduce the charging capacity and life of your device and battery.• Do not use your device while it is charging or touch your device with wet hands.• Keep your device dry. Humidity and liquids may damage the parts or electronic circuits inyour device. Water damage to your device can void your manufacturer’s warranty.• Do not use your device outdoor during a thunderstorm. Doing so may result in electric shockor device malfunction.Excessive exposure to loud sounds can cause hearing damage. Exposure to loudsounds while walking may distract your attention and cause an accident.Your headset overviewMake sure you have the following items: headset, travel adapter and user manual. Thesupplied items may vary.Power switchIndicator lightMicrophoneEarpieceVolume buttonEar hookCharging socketTalk buttonwww.samsung.comHM1350• This manual’s images and content may differ from the product.• You can access the full user manual for more information. Visit www.samsung.com and thensearch for the user manual using the model name of the device.Quick Start GuidePrinted in ChinaEnglish (EU). 09/2016GH68-42177A Rev.1.3Charging the headsetThis headset has a rechargeable internal battery which is non-removable. Make sure theheadset is fully charged before using it for the first time.Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers couldcause damage to the headset or in extreme circumstances an explosion, it could alsoinvalidate any warranty on the product.1 Connect the travel adapter to the charging socket on the headset.2 Plug the travel adapter in to the wall socket. During charging, the indicator light will turnred.3 When the headset is fully charged, the red indicator light changes to blue. Unplug thetravel adapter from the wall socket and the headset.Charging time Approximately 2 hours*Talk time Up to 8 hours*Standby time Up to 300 hours** Depending on the phone type and usage, the actual timemay vary.• To save energy, unplug the charger when not in use. The charger does not have apower switch, so you must unplug the charger from the electric socket when not inuse to avoid wasting power. The charger should remain close to the electric socketand easily accessible while charging.• The socket-outlet shall be installed near the equipment and shall be easily accessible.Turning the headset on or offTo turn the headset onSlide the Power switch on. The blue indicator light flashes 4 times.Turning the headset on for the first time, it will automatically enter pairing mode forapprox. 3 minutes.To turn the headset offSlide the Power switch off. The indicator light flashes blue and red then turns off.Turning the indicator light on or offThe Headset status light is there to show you the current status of your headset, but if itbothers you at night, you can turn it off.• Press and hold both Volume buttons simultaneously to turn the indicator light on or off.• You cannot switch the indicator off while in Pairing mode.• The indicator light will always work when the headset is turned on or off, when a call isreceived, in Pairing mode and when the battery is low.Wearing the headsetDepending on which ear you are going to wear the headset, simply adjust the ear hookaccordingly.Pairing and connecting the headsetPairing means a unique and encrypted wireless connection between two Bluetooth deviceswhen they agree to communicate with each other.In Pairing mode, two devices should be placed close enough.Pairing and connecting the headset with a phone1 Enter Pairing mode (The blue indicator light stays lit and stays for 3 minutes).• Press and hold the Talk button for 3 seconds.2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’suser manual).3 Select the headset (HM1350) from the list of devices found by your phone.• If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset toyour phone. Once pairing is completed, the headset will attempt to reconnect each timeyou turn it on.Left Right |
Related manuals for Samsung HM1350
Samsung HM1100 Quick Start Manual
Samsung HM1000 Quick Start Manual
Samsung WEP350 Quick Start Manual
Samsung WEP750 Quick Start Manual
Samsung WEP180 Quick Start Manual
Samsung WEP460 Quick Start Manual
Samsung WEP300 Quick Start Manual
Samsung WEP170 Quick Start Manual
Samsung WEP301 Quick Start Manual
Samsung EO-MG900 Quick Start Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine