system settingPC SoftwareIf you set PC Software to On, you can use the PC software built into the camcorder (Intelli-studio) by connecting your camcorder to your PC using the camcorder’s USB cable. You candownload the video and photo images stored on the camcorder to your PC’s hard disk and editthe videos and photos using the internal PC software.1. Touch the Menu ( ) Setting ( ) tab “PC Software.”2. Touch the desired submenu item.3. To exit the menu, touch the Exit ( ) or Return ( ) tab.Submenu itemsOff: Disables the PC Software function.On: The internal editing software starts when you connect thecamcorder to a PC.••The PC Software function is not available under the following conditions:- If “USB Connect” is set to “PictBridge”To enable the PC Software function, set “USB Connect” to “Mass Storage,” in the system settingmenu option. page 82The PC Software is compatible with the Windows operating systems only.•••USB ConnectYou can transfer data to a PC or print photos directly by establishing the correct USB connection.1. Touch the Menu ( ) Setting ( ) tab “USB Connect.”2. Touch the desired submenu item.3. To exit the menu, touch the Exit ( ) or Return ( ) tab.Before connecting a USB cable, check whether the current USB mode is appropriate for the functionyou want to use.Submenu itemsMass Storage: Connect to a PC to transfer videos or photos. page 100PictBridge: Connect to a PictBridge printer to print photos directly (whenusing the PictBridge function). page 92••82OffOnPC Software1/1Mass StoragePictBridgeUSB Connect1/1
