1151 Press the MENU button.Press the ▲ or ▼ button to select “Setup”, then pressthe ENTER button.2 Press the ▲ or ▼ button to select “Screen BurnProtection”, then press the ENTER button.3 Press the ▲ or ▼ button to select “All White” or “SignalPattern”, then press the ENTER button.• All White: This function removes after-images on thescreen by changing the color of pixels towhite. Use this function when there areremaining after-images or symbols on thescreen especially when you displayed astill image on the screen for a long time.• Signal Pattern: This function removes after-images onthe screen by moving all the pixels onthe PDP according to a pattern. Usethis function when there are remainingafter-images or symbols on the screenespecially when you displayed a stillimage on the screen for a long time.4 Press the EXIT button to exit.Notes• To remove after-images on the screen, use either the “All White” or “Signal Pattern” function.Although both functions remove after-images on the screen, “Signal Pattern” is more effective.• The after-image removal function has to be executed for a long time (approximately 1 hour) toeffectively remove after-images on the screen. If the after-image is not removed after performingthe function, repeat the function again.• Press any key on the remote control to cancel this feature.Reducing the Effects of Screen BurnIf screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to helpremove screen burn artifacts.Pixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPlug & Play √Language : English √Time √Game Mode : Off √V-Chip √Caption √† MoreSetupT VMove Enter Return
