Samsung HP-T4264 Owner's Instructions Manual

Also see for HPT4264 - 42" Plasma TV: Manual Safety instructions Owner's instructions

Contents

English - 74Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Switches from Anynet+ to TV broadcast mode.Record Starts a recording. (This menu works only for a device supporting recording.)(Device_Name) Menu Shows the menu of the connected device.Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.(Device_Name) Operation Shows the play control menu of the connected device.Example: When a DVD Recorder is connected, the play control menu of the DVD Recorderappears.Connect (Device_Name) Your TV connects to the corresponding device.Receiver Sound is output through the receiver (home theater). A audio stream in HDMI is one wayonly from Device to TV. But there’s SPDIF output in TV. So TV sound can be sent to HT.Setup You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for usingAnynet+.TV Remote Control Buttons Available in Anynet+ ModeDevice Type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, when the menu of thecorresponding device is displayed on the screen.Numeric buttons▲/▼/◄/►/ENTER buttonsColor buttonsEXIT buttonAfter switching to the device, while playing a file◄◄ (Backward search)►►(Forward search)(Stop)►  (Play/Pause)Device with built-in Tuner After switching to the device, when you are watchinga TV program CH ▲/▼ buttonAudio Device When Receiver is activated VOL +/- buttonMUTE buttonAnyview2 When watching TV ►  (Play/Pause)➢ The Anynet+ function only works when the remote control is set to TV.➢ The REC button works only while in the recordable state.➢ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices onlyusing the TV remote control.➢ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.➢ The Anynet+ functions don’t operate for the products from other manufacturers.➢ The Anynet+ functions do not work with other manufacturers’ products.➢ The ◄◄, ►► operations may differ depending on the device.RecordingYou can make a recording of a TV program using a recorder.Press the REC button.Recording begins. (Only when the Anynet+ enabled recording device is connected.)➢ You can also record the source streams by selecting Record after pressing the Anynet+ button.➢ The current TV program is recorded in the Watching TV status. If you are watchingvideo from another device, the video from the device is recorded.➢ Before recording, check whether the antenna jack is properly connected to the recording device.For the antenna connection to the recording device, refer to its user manual.