Samsung HPS5033X Service Manual

Reference Information14-2 Samsung Electronics■ SD/HD broadcasts and the TV's display capability are related1. A digital broadcast should be transmitted in wide screen (an aspect ratio of 16:9) HD. If the broadcasting station converts aconventional program created in normal screen (aspect ratio of 4:3) into a digital signal and broadcasts the signal, the left andright of the picture will not be displayed.This symptom also appears in other manufacturer's TV's. The three appliance companies are trying to resolve the problemthrough the Ministry of Information and Communication.* When watching an SD (normal) broadcast through a Digital (Wide) TV (480P normal broadcast)* When watching an SD (normal) broadcast through a Digital Ready (Wide) TV (Using a set-top-box)* When watching an analog (normal) broadcast through a wide TV(When watching a broadcast after changing the aspect ratio of the TV from 16:9 (wide screen) to 4:3)2. When watching a DVD title or video tape in wide screen (21:9) through a wide (16:9) TV, watching video from a computer orgame console by selecting the aspect ratio to 4:3, or watching video from a DVD, VCR, computer or game console through awide TV by selecting the aspect ratio to normal (4:3) or wide (21:9), the left and right, or top and bottom of the picture will not bedisplayed.This symptom appears in other manufacturer's TV's. The three appliance companies are trying to resolve the problem throughthe Ministry of Information and Communication.* In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen modes can be selected.(16:9 → Zoom1 → Zoom2 → 4:3).* In TV(DTV), COMPONENT(720p, 1080i), PC, HDMI modes, only 16:9 & 4:3 modes can be selected.* In Zoom1 and Zoom2 modes, you can move the picture on screen by pressing the ▲ or ▼ button.* 16:9 : Sets the picture to 16:9 wide mode.* Zoom1 : Magnifies the size of the picture on the screen.* Zoom2 : Expands the Zoom1 format picture.* 4:3 : Sets the picture to 4:3 normal mode.■ Restrictions1. When you want to change the picture size in PIP 'ON', you must turn the PIP off before changing the size.However, you can change the main picture size even in PIP ON for products with no restrictions.2. When the picture size is not Normal (4:3 for 4:3 display devices, 16:9 for 16:9 display devices) and you turn PIP on, the picturesize is changed to Normal.However, you can turn PIP on without changing the picture size for products with no restrictions.3. The picture size can be changed even in the blue screen.However, the picture size should be controlled by the product specifications if the change is impossible due to hardwarerestrictions.