Samsung HT-DB1680 Instruction Manual

Press AUX on the remote control to select AUX 1or AUX 2.• Each time the button is pressed, the selection changes asfollows: DIGITAL IN AUX 1 AUX 2.• You can also use the FUNCTION button on the main unit.The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝AUX1 ➝ AUX2 ➝ FM ➝ AM.• If you have connected an external digitalcomponent and Video In (1, 2) at thesame time, there will be video from AUX 1even when you select DIGITAL IN.• If you have connected Audio In (L, R) to1, connect Video In to 1 as well, and ifyou have connected Audio In (L, R) to 2,connect Video In to 2 also.Connect Audio In on the DVD player to AudioOut on the external analog component.• Be sure to match connector colors.Connect Video Out on the DVD player to VideoIn on the TV.1Connect Video In on the DVD player to VideoOut on the external analog component.23416Example: Analog signal components such as a VCR, Camcorder, and TV.Connecting an External Analog ComponentPress AUX on the remote control to select ‘DIGITAL IN’.• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.• You can also use the FUNCTION button on the main unit.The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.Connecting External ComponentsConnect Video Out on the DVD player to Video In on the TV.1Connect the Digital Input (OPTICAL) to the Digital Output on the externaldigital component.2315Example: Digital signal components such as a DVD or CD Recorder.Connecting an External Digital ComponentNoteCONNECTIONSVOLTAGE SELECTORDIGITAL OUTVIDEO OUTVIDEO INOptical Cable(not included)VIDEO OUTVIDEO INL RVOLTAGE SELECTORVideo CableAudio CableIf the externalanalog componenthas only one AudioOut, connect eitherleft or right.The AC Cord must be plugged into an appropriate socket.Before plugging your system into an AC outlet, you must check the voltage.Check the position of the voltage selector on the rear of the system (OPTIONAL).1. Plug the AC Cord on the rear of the system into an appropriate outlet.2. Press the On/Standby button to switch your DVD Player system on.