Samsung HT-DL200 Instruction Manual

Also see for HT-DL200: Instruction manual Instruction manual Service manual

GBB3635When the button is pressed, a presetbroadcast station is selected.Hold in the button. Automatic searchingbegins, and then stops when a station is tuned in.Press the button to tune to the chosenstation. The frequency changes incrementally in eitherdirection each time the corresponding button is pressed.Listening to the Radio Presetting stationsAuto Station 1Auto Station 2Manual StationPress the Tuner(Band)button.1 Select a broadcast station.2• The selection toggles backand forth between "FM" "MW"and "LW" each time theTuner(Band) button ispressed.Press the MO/ST button. (only FM)• The selection toggles back and forth between “STEREO” and “MONO”each time the MO/ST button is pressed.• In a poor reception areas, select Mono mode for a clear, interference-freebroadcast.To Listen in Mono/StereoAudioMO/ST• Store the changes while repeatingsteps 1 to 4 above.Repeat steps 3 to 4 above.To store other ChannelsTo change the Preset StationsExample: Presetting FM 89.1 in the memoryMH ZL RPROGRAM MH ZL RPROGRAM MH ZL RL RMH ZL RMH ZL RPress the Tuner(Band) buttonand select the FM band.Select the MANUAL bypressing the Stop ( )button on the main unit.1 Use the andbutton to tune into 89.12• The selection toggles back and forth between "" each time the Tuner(Band) button is pressed.34 5 6• When using this feature for thefirst time, be sure to store thestation in the preset memory atFM1 as the unit does not comepreprogrammed with defaultpresets.• The preset stations operation iscompleted.RemoteControlUnitPress the button to select the PRESET mode.Then press the button to select a stationstored in the presetPress the Stop ( ) button to select the MANUALmode on the front panel. Then hold in thebutton to make the unit begin automaticall searchingfor broadcast stations.Press the Stop ( ) button to select the MANUAL modefront panel. Press the button to tune to thedesired station. The frequency changes incrementally in eitherdirection each time the corresponding button is pressed.Auto Station 1Auto Station 2Manual Station1 Select a broadcast station.2MainUnitPress the Function button toselect the desired band (FM,MW or LW).You can listen to the chosen band (FM, MW or LW broadcast stations) by using eitherthe automatic tuning or manual tuning operation. You can store up to:Press the Program button. Press the Program button.Use the andbutton to select FM2.15 FM stations8 MW stations7 LW stations• FM Frequency Modulation• AM(MW) Medium Wave• LW Long Wave